HK Enquiry Hotline 香港 查詢熱線 : 3913 3533
  • Home
  • Product
    • X Series IP Phone
    • XU Series IP Phone
    • Android IP Phone
    • Hotel IP Phone
    • Headset
    • Sip Doorphone
    • SIP Indoor Station
    • SIP PA Gateway
  • Support
    • Technical Wiki
    • Download Centre
    • Warranty
  • Partners
    • Technical Partner
    • Service for Reseller
    • Become our Reseller
  • About us
    • About Fanvil
    • News and Events
    • Contact us
  • BLOG

Technical Wiki

Let's talk about VOIP

Support Technical Wiki

How to Collect a Packet Capture from Your Fanvil IP Phone by wireshark?

How to Collect a Packet Capture from Your Fanvil IP Phone by wireshark ? Introduction: To troubleshoot or analyze an issue such as SIP registration failure, basic call issue of transfer, conference, forwarding etc., you may need to get a packet … Continue reading →

How to change colors of Fanvil X6 DSS Key icon

Fanvil X6 DSS key How to change colours of Fanvil X6 IP Phone DSS Key icon Upgrade your X6 to the latest firmware and try the different colours of DSS key icons! You can upload your own customized icons too! … Continue reading →

如何在Fanvil C600 IP Phone上利用RTSP檢視HIKVISION海康威視的IP CAMERA視頻?

如何在Fanvil C600 IP Phone上利用RTSP檢視HIKVISION海康威視的IP CAMERA視頻?   FANVIL C600 IP Phone 顯示CCTV視頻的設定 一、假定CCTV的資料如下: HIKVISION 海康威視 Ip:192.168.188.100 Login:username/password 二、登入FANVIL C600的設定界面,選擇phone->action plan 設定了一個分機800 Incoming call時情況,可添加多條類似的記錄。 Digit Map:填入Incoming call分機號碼,如800。 URL:rtsp://username:password@192.168.188.100:554/Streaming/Channels/101   填入這種格式的Link,注意大小寫。 注意紅色部分是CCTV的資料,最後 101是指CCTV Channel 1的視頻, 201是指CCTV Channel 2的視頻……如此類推。     Fanvil C600 Android Phone – Multimedia … Continue reading →

Configure Fanvil IP Phone on 3CX IPPBX Server

Configure Fanvil IP Phone on 3CX IPPBX Server Use 3CX server to implement firmware version auto-update, configuring account registration etc. for Fanvil IP phones. This feature allows you to configure your Fanvil IP phones in bulk, saving time substantially when … Continue reading →

Customizing your IP Phone Background Logo

Fanvil Phone model Format Resolution File size Fanvil X5S .bmp 480*320 16bit / RGB565 <=300KB Fanvil X6 .bmp 480*272 24bit / RGB888 <=380KB

SIP Account Registration Tutorial for Fanvil IP Phones

  SIP Account Registration Tutorial for Fanvil IP Phones

FANVIL IP Dial Video Tutorial (Fanvil X1/X2/X2C/X3S/X4/X5S)

This video demonstrates three ways to conduct IP dialing on Fanvil IP phones. Applicable models: X1/X2/X2C/X3S/X4/X5S. Firmware Version: all.  

How to factory reset a Fanvil X and H series

Applicable to Fanvil X3/3G, X4, X5/5S, X6 and H2S, H3, H5 Follow the steps below to factory reset your Fanvil X device in order to bring back the factory default settings. This must be done before provisioning your Fanvil phone in … Continue reading →

Upgrade firmware for Fanvil ip phone in post mode

    This video will show you how to upgrade firmware for your Fanvil IP phones in Post Mode. When you encounter the IP Phone in Post Mode status, you can upgrade firmware through Post Mode to fix it. This … Continue reading →

How to import background image for Fanvil X series phones

Fanvil new X series colour phone supports customized wallpaper imported; you can upload it to phones via a web page or Auto Provisioning. Model/ Pixel size(WxH) Bit depth Format (suffix) Image size name X3S/X4 320X240 16bit  RGB565 bmp About 150K … Continue reading →

How to configure Fanvil X series for 3CX (v15.5 only)

  Refer to 3CX Official Website https://www.3cx.com/sip-phones/fanvil-x3-x5/   How to configure Fanvil X series for 3CX This guide applies to v15.5 only. Supported Models: Fanvil X series Fanvil X2 Fanvil X3(P) Fanvil X3S (G) Fanvil X4(G) Fanvil X5(G) Fanvil X5S Fanvil X6 (Hardware … Continue reading →

Firmware Upgrade of Fanvil phones

Firmware Upgrade of Fanvil phones Supported Models: Fanvil X and C series The following document will outline how to upgrade the firmware of a Fanvil X and C series IP phone using the device’s own web interface. This step is … Continue reading →

How to customize Fanvil Hotel phone’s UI

How to Change the Background Picture 1: Get the IP Address: You have two ways to get the IP address: One is long press “#” for 5 sec, and second is press “#*111” . 2: Logo into the web setting … Continue reading →

How to configure Fanvil X series for 3CX

This guide applies to v15 only.   Supported Models: Fanvil X series Fanvil X3(P) – min. firmware version 1.4.0.1976 Fanvil X3S – min. firmware version 2.0.3.2992 Fanvil X4 – min. firmware version 2.0.3.2992 Fanvil X5(G) – min. firmware version 1.4.0.1971 … Continue reading →

Fixing 3CX v15 & Fanvil Phone BLF Problem

    This is a guide to those who have recently upgraded to 3CX version 15 and are having issues with the BLF lights on their Fanvil C600 or X5G phone. If you’ve recently upgraded to the latest version of … Continue reading →

How to factory reset a Fanvil X and H series

Applicable to Fanvil X3(P), X3S, X4, X5(G) and H3 Follow the steps below to factory reset your Fanvil X device in order to bring back the factory default settings. This must be done before provisioning your Fanvil phone in case … Continue reading →

When can I use which provisioning method on 3CX?

The guide below outlines the provisioning methods which shall be used for Supported IP Phones only. For legacy phones follow the instructions defined with the provisioning guide itself. Supported IP phones have a vast amount of possible provisioning methods which are … Continue reading →

Firmware Upgrade of Fanvil phones

Supported Models: Fanvil X and C series This guide is applicable to the following devices: Fanvil X series models Fanvil X3(P/S) Fanvil X4 Fanvil X5(G) Fanvil C series models Fanvil C400 Fanvil C600 The following document will outline how to … Continue reading →

Auto Provisioning Fanvil X3, X5 and X5G IP Phones for 3CX Phone System

This guide shows you how to automatically provision the Fanvil X3/X3P and X5/X5G IP phones for use with 3CX Phone System. This guide has been tested with the latest firmware versions supported by 3CX Phone System 12 & 12.5. The easiest way … Continue reading →

How to unlock the Keyboard – Fanvil IP Phone

How to unlock the Keyboard – Fanvil IP Phone (C58P/C62P/C66/F52/C01P)   Why my keyboard is locked? Press “#” for about 3 second. Your keyboard is locked!   How to unlock? Press “123” then press “OK”  

1 of 212

Catagories

  • News and Events (27)
  • Our BLOG (29)
  • Service Introduction (9)
  • Technical Wiki (29)

Recent Posts Widget

  • How to Collect a Packet Capture from Your Fanvil IP Phone by wireshark?By Fanvil on December 9, 2018
  • How to change colors of Fanvil X6 DSS Key iconBy Fanvil on October 6, 2018
  • 如何在Fanvil C600 IP Phone上利用RTSP檢視HIKVISION海康威視的IP CAMERA視頻?By Fanvil on September 27, 2018
  • Configure Fanvil IP Phone on 3CX IPPBX ServerBy Fanvil on September 6, 2018
  • Customizing your IP Phone Background LogoBy Fanvil on August 21, 2018
  • SIP Account Registration Tutorial for Fanvil IP PhonesBy Fanvil on July 31, 2018
  • FANVIL IP Dial Video Tutorial (Fanvil X1/X2/X2C/X3S/X4/X5S)By Fanvil on July 18, 2018
  • How to factory reset a Fanvil X and H seriesBy Fanvil on July 3, 2018
  • Upgrade firmware for Fanvil ip phone in post modeBy Fanvil on June 20, 2018
  • How to import background image for Fanvil X series phonesBy Fanvil on April 17, 2018
  • How to configure Fanvil X series for 3CX (v15.5 only)By Fanvil on February 22, 2018
  • Firmware Upgrade of Fanvil phonesBy Fanvil on January 22, 2018
  • How to customize Fanvil Hotel phone’s UIBy Fanvil on November 22, 2017
  • How to configure Fanvil X series for 3CXBy Fanvil on May 12, 2017
  • Fixing 3CX v15 & Fanvil Phone BLF ProblemBy Fanvil on April 3, 2017
  • How to factory reset a Fanvil X and H seriesBy Fanvil on January 12, 2017
  • When can I use which provisioning method on 3CX?By Fanvil on January 12, 2017
  • Firmware Upgrade of Fanvil phonesBy Fanvil on November 12, 2016
  • Auto Provisioning Fanvil X3, X5 and X5G IP Phones for 3CX Phone SystemBy Fanvil on May 6, 2015
  • How to unlock the Keyboard – Fanvil IP PhoneBy Fanvil on December 15, 2014
  • Fanvil X3 Screen Menu TreeBy Fanvil on November 21, 2014
  • Auto Provisioning Fanvil C58P, C62P IP Phones for 3CXBy Fanvil on October 23, 2014
  • Fanvil I20T SIP Access Control System (SIP Doorphone + RFID Card Reader)By Fanvil on July 22, 2014
  • Fanvil IP Phone – Resolve POST ModeBy Fanvil on June 16, 2014
  • Fanvil C66P / C62P / C58P / F52 / C01 IP phone 聆聲製作By Fanvil on June 16, 2014
  • Fanvil C58P & C62P IP Phone Logo 製作By Fanvil on June 10, 2014
  • 常用的 VOIP CODECBy Fanvil on June 8, 2014
  • 60秒 Fanvil IP Phone 極速連接 ElastixBy on May 31, 2014
  • EHCP Server Setup Guides – Elastix | Fanvil IP PhoneBy Fanvil on April 6, 2014

Fanvil Technology Co Ltd – Hong Kong

Founded in 2002. As a professional developer and manufacturer of VoIP products, Fanvil provides VoIP communication devices solutions for small and medium sized businesses, as well as large mission-critical enterprise environments.

Our Address

1) Hong Kong Office | 香港辦公室:
Flat G, 4/F, Effort Industrial Building,
2-8 Kung Yip Street, Kwai Chung,
NT, Hong Kong.
香港 新界 葵涌 工業街 2 - 8 號
力豐工業大廈 4樓 G室

Contact us

General Line | 一般查詢: +852 39133533
Fax | 傳真: +852 39133566
Email: info@fanvil.hk
HK Web: http://www.fanvil.hk
International Web: http://www.fanvil.com

Contact Us

  • Tel+ 852 3900 1900
  • Fax+ 852 3900 1999
  • Mailinfo@hk-matrix.com
  • Webhttp://www.hk-matrix.com
Copyright 2015 · Fanvil Technology Co Ltd - Hong Kong | Tel: 852-39133533 | Fax: 852-39133566